A motorized longboard allows for greater freedom and comfort on your commute.
In this day and age, commuting to work or school has become a pain. Congestion, pollution, parking issues and the stress of travelling can all take its toll on our mental wellbeing. The rise in the popularity of electric scooters (e-scooters) is testament to this.
But what if we could have more time outside while commuting? What if our commute was actually enjoyable? Enter the motorized longboard!
The board can reach speeds of up to 23km/h so you’re able to enjoy a faster commute with less congestion. It’s true that they’re slightly heavier than traditional boards but lighter models are now available. And because it’s powered by a lithium battery, it’s not subject
How to build your very own motorized longboard
Building a motorized longboard is not an easy task, but it is something that you will never regret. You will be the talk of the town with your one of a kind longboard.
To build your own motorized longboard, you will need to find a suitable skateboard deck. Something like a pro-model skateboard deck or even an old deck from your childhood would work well because you won’t be needing any fancy graphics on the board. You’ll also need to drill holes in the board, so that you can mount two wheels and attach stringers for strength.
Finally, attaching a battery pack and motor to the board is very easy if you know where to look for these things at your local hardware store.
Board:
A board is the part of a longboard that you place your feet on to push off and start going. The deck is the surface of the board that you stand on.
Motor:
One of the most common types of motors is a brushed motor. They provide a cost-effective way to get power for a low-performance application. They are very easy to use and can be controlled with any type of controller and battery pack. The speed can be controlled by the throttle on the remote control or the controller.
For such a motorized longboard to work, it is important that the kv of the motor is from 170 to 245 and watts between 1500 and 3000. The torque needs to be from 80 to 120 Nm and RPM from 2000 up to 12000. Make sure that the motor is brushless and has an integrated controller chip.
Battery:
Typically, the battery is an electric powered vehicle’s power source. The battery determines how far you can go. You will want a battery that is compatible with your motor and your use case.
The batteries for electric skateboards are usually Lithium-ion batteries. They range from 7,000 to 16, 000 mAh. The more Amp hours, the faster the battery will charge and last.
ESC:
The ESC is the most important component of your electronic skateboard as it controls your speed and acceleration.
The ESC can be a standalone unit or it can be integrated with the board and battery. Some boards come with an ESC already installed while others require you to install your own. In any case, every board will have some way to connect to the receiver in order to control it from your remote controller.
Control:
The ESC is one of the most important parts of the motorized longboard. It controls the motors, which are located in the drive-wheel.
The ESC can be programmed to have a variety of settings which create different types of movements on your longboard.
It is important for you to pick an ESC that is both compatible with your motor and has an adequate power rating. The higher power rating, the more speed and acceleration your board will have.
If you are looking for a motorized longboard then LumBuy.com will be the perfect place for you. You can find many types of motorized longboards with different prices and models.
In short, it is a website where you can find best quality skateboards with good price.
You can buy motorized longboards here at affordable price and also get free shipping offer.
